Avatar for Knightwerx
Knightwerx
Actively Hiring
AI-powered unmanned aerial systems for defense

Senior Embedded Software Engineer (Small UAV Flight Controls)

Posted: 2 weeks ago• Recruiter recently active
Job Location
Remote Work Policy

In office

Visa Sponsorship

Not Available

RelocationAllowed
Skills
C++
C
Spi
Uart
I2C
Zephyr
CAN bus
Free Rtos
ARM Cortex-M
DMA
multi-meters
oscilloscopes
ChibiOS
Logic Analyzers
Timers
Interrupt Handling
Digital Filtering
Registers
JTAG/SWD Debuggers
UAVCAN/Cyphal
Notch Filters
Low-Pass Filters

About the job

Role Overview

We are seeking a Senior Embedded Software Engineer for Small UAV Flight Controls to

architect, develop, and test deterministic, safety-critical flight control firmware for our

small unmanned aerial vehicles (Group 1 and Group 2 tactical aircraft, fixed-wing, or hybrid

VTOLs). In this role, you will own the software layer that sits directly between complex

guidance algorithms and physical aircraft actuation, ensuring maximum stability, agility,

and responsiveness on lightweight, space-constrained hardware.

You will bridge the gap between control theory and low-SWaP (Size, Weight, and Power)

bare-metal or RTOS execution. You will write robust, high-integrity code that operates

under strict real-time constraints, optimizing every clock cycle to ensure ultra-low latency

from sensor sample to actuator command.

Key Responsibilities

Flight Software & Driver Development

• Control Loop Execution: Design, optimize, and implement high-rate stabilization

loops, attitude control algorithms, and actuator mixing logic in C and C++.

• Low-Level Drivers: Develop and maintain bare-metal peripheral drivers for highly

integrated microcontrollers to interface with IMUs, magnetometers, barometers,

airspeed sensors, and GPS modules.

• RTOS Optimization: Configure and profile Real-Time Operating Systems (e.g.,

FreeRTOS, ChibiOS, Zephyr) for highly predictable task scheduling, deterministic

execution, and minimal jitter.

System Integration & Deterministic Communication

• Bus Architecture: Manage and optimize communication protocols over lightweight,

low-pin-count buses including CAN bus (UAVCAN/Cyphal), SPI, I2C, and UART to

interface with Electronic Speed Controllers (ESCs) and servos.

• Fault Tolerance: Implement robust fault detection, isolation, and recovery (FDIR)

mechanisms to immediately handle small UAV anomalies, such as sensor

dropouts, frame vibrations, or battery voltage drops.

• HIL Testing: Build and utilize Hardware-in-the-Loop (HIL) simulation setups to

safely validate flight software performance and corner-case failure modes on the

bench.

SWaP Optimization & Architecture

• Resource Management: Target, profile, and optimize memory footprint

(SRAM/Flash) and CPU usage on high-performance microcontrollers (e.g., ARM

Cortex-M4/M7/H7).

• Open-Source Hardening: (If applicable) Maintain, customize, and secure opensource small UAV ecosystems like PX4, ArduPilot, or Betaflight for custom

proprietary hardware configurations.

Required Skills & Qualifications

• Education: Bachelor’s or Master’s degree in Computer Engineering, Electrical

Engineering, Robotics, or a related technical discipline.

• Firmware Expertise: Deep professional experience developing production-grade

embedded C and C++ software for real-time systems.

• Microcontroller Fluency: Extensive experience with ARM Cortex-M or similar

architectures, registers, timers, DMA, and interrupt handling.

• Lab Tool Proficiency: Hands-on experience using oscilloscopes, logic analyzers,

multi-meters, and JTAG/SWD debuggers to isolate hardware vs. software issues.

• State Estimation Basics: Practical understanding of digital filtering (e.g., notch

filters, low-pass filters) used to mitigate high-frequency frame vibrations common in

small UAVs.

Preferred Qualifications

• Direct experience contributing to or deploying customized PX4 Autopilot or

ArduPilot stacks onto custom small UAV airframes.

• Background in mathematical modeling, MATLAB/Simulink code generation, or

working alongside GNC engineers to port control laws into C.

• Experience implementing lightweight safety protocols or functional safety

frameworks scaled down for consumer, commercial, or defense-grade small UAV

systems

About Knightwerx

Knightwerx develops American-made, AI-powered unmanned aerial systems and remote sensing technologies for commercial and government customers. Our platforms support autonomous operations, human-machine teaming, and mission-critical applications where reliability, performance, and speed matter.

Similar Jobs

Axio Education company logo
Axio Education
The AI-Native Education Platform Built for AI-Driven Learning. Designed for Educators